Industrial floor repair
Warehouses, factories, workshops and logistics floors that take forklift traffic and can't be shut down for a week.
- Joint and crack repair
- Spalling and edge reinstatement
- Traffic-lane and hardstand repairs
Concrete remediation Australia
Concreterepairs forworkingsites.
Cracked joints. Spalled edges. Worn traffic lanes. Failed coatings. We cut out the damage, repair the slab and put the floor back in service.
Concrete repair, resurfacing, coatings.
500+Completed projects
10+Years experience
100+Sites Australia wide
Concrete work for facility managers, builders and asset owners.
What we fix
Concrete that's cracking, spalling or worn out - back to a floor you can use.
We inspect the slab, tell you what's actually failing and what it'll take to fix, then do the work.
Cracks and jointsMovement joints, shrinkage cracks, spalled edges and broken-out sections cut, prepped and reinstated before they spread.
Traffic and loading areasWarehouse aisles, hardstands, ramps and loading zones repaired in stages so the site keeps running.
Coatings and finishesEpoxy, polyurethane, polished concrete and sealers - chosen for the traffic, chemicals and cleaning the floor actually sees.
Commercial and home concreteShopfit floors, driveways and house slabs. Same crew, smaller scale.
Services
Four kinds of work. One crew.
Tell us what's cracking, lifting, wearing through or ready for a new finish. We inspect the floor, write the method, price it, then do it.
Slab resurfacing and remediation
Worn, uneven or breaking-down slabs ground back, patched and rebuilt to a flat, hard-wearing surface.
- Grinding and surface preparation
- Patch repairs and levelling
- Resurfacing for worn slabs
Decorative and polished finishes
When the floor has to look the part - showrooms, retail fitouts, offices and homes.
- Polished concrete
- Exposed aggregate and decorative resurfacing
- Finished floors for commercial and residential spaces
Sealers and protective coatings
Forklift traffic, moisture, dusting, regular wash-downs - when the floor needs more than bare concrete.
- Epoxy floor coatings
- Concrete sealers
- Protection and maintenance recommendations
Before the project
On-site inspection and a written method.
- Walk the slab and document the failure
- Sound for delamination, mark cracks and spalling
- Plan access, staging and traffic
- Lock the scope and price before we start
During works
Cut, repair and finish - without shutting you down.
- Saw-cut and remove failed concrete
- Patch joints, cracks and spalled sections
- Run barricades, signage and traffic controls
- Daily update to the site contact
Final stage
Hand back a floor you can drive on.
- Final walk-through with the site contact
- Finish checked against the agreed scope
- Care and cleaning notes for the surface
- Recommendation for future protection if needed
Field work
Recent jobs.
A few of the floors we've handed back over the last twelve months.
Why MIA Remediation
Why people call us back.
Six things we get right that other concrete crews mostly don't.
We quote what we saw
We walk the slab before we price it. The quote describes the actual failure: joint, crack, spalling, movement, coating breakdown. Not a square-metre rate guessed off a photo.
We work around your operation
Forklifts, trucks and night shifts don't stop because the floor needs fixing. We stage the work so the site stays open.
We don't dodge the safe-work bit
Traffic plans, barricades, JSAs, induction. Done before the saw comes out, not after someone complains.
We pick the right repair, not the easy one
Semi-rigid filler vs. rigid grout vs. full cut-and-replace. The failure mode tells us which, not the budget line.
You always know what's happening
One contact, daily updates, photos at each stage. No chasing the office for an answer.
We leave the site how we'd want it left
Concrete dust, offcuts and signage cleared before we go. The finish gets walked through with you, not just emailed.
Testimonials
What clients say.
Showing up, doing what we said, and leaving a floor that holds up.
5 / 5
We had serious cracks in our warehouse floor, and MIA Remediation sorted it quickly. Ivan explained everything clearly, and the result speaks for itself.
WR
Wendy RileyManager
5 / 5
We needed our factory floor resurfaced. They showed up on time, worked efficiently and left the place spotless. The floor feels solid now.
SL
Sarah LFloor manager
5 / 5
Super friendly team, fair pricing, and the quality of work was top notch. It's refreshing to work with people who actually care about doing a good job.
BJ
Bill JovanovskiOwner
Frequently asked
What to know before the site visit.
What facility managers, builders and homeowners ask before they pick up the phone.
What type of concrete work does MIA Remediation handle?+
Cracked joints, spalling, slab remediation, resurfacing, polishing, decorative finishes, epoxy and polyurethane coatings, sealing, driveways and house slabs.
Do you inspect the site before quoting?+
Yes. Every job starts with a site visit. We need to see the slab, the access and how the site runs before we can price the work honestly.
Can you work around an operating site?+
Yes. Most of our work is on live sites. We stage the job around shifts, deliveries and aisles that need to stay open.
What happens after handover?+
We walk the finished floor with you against the agreed scope. If the surface needs ongoing care you get a short note on cleaning and when to reseal. Not a service contract pitch.
Request a quote
Send the site details. Get a clear repair scope.
Tell us the surface, the location, the access window and what's gone wrong. We come back with the next step for inspection and pricing.